THIS WINDOW IS SUPPLIED UNASSEMBLED 
AND DOES NOT INCLUDE ANY GLASS OR HARDWARE. 
IT WILL NEED TO BE GLUED AND ASSEMBLED BY A SKILLED CARPENTER. 
BELOW IS A LIST OF TOOLS AND MATERIALS YOU WILL NEED 
TO COMPLETE THE WINDOW.
 
DISPATCH INFORMATION 
 
Windows will be dispatched in 3 days, unless a quantity more than 5 is purchased, 
in this instance dispatch may be up to 3 weeks
If you need clarification on dispatch times, please contact me.
 
This is a link to our YouTube assembly tutorial for the windows Click Here
 
IN THIS KIT YOU WILL RECEIVE
To make the frame - 1 head, 2 sides, 1 cill, and 1 sub cill.
To make the sash - 1 heads, 2 sides and 1 bottom rail.
Aquamac draught strips (require cutting to size)
4 Glazing beads.
—————————————————————-
 
Please wear any PPE necessary 
and always carry out a full risk assessment 
before attempting each task.
DO NOT USE POLYURETHANE GLUE WITHOUT VINYL GLOVES 
AND SAFETY GLASSES.
 
Materials required to complete window.
A suitable high quality polyurethane glue - ie, Gorilla Glue
2 - 3” butt hinges
1 - window stay
1 window fasten
GLAZING
double glazed unit 4/16/4 - 1069mm wide x 294mm high - softcoat K glass, Argon gas fill
1.5mm Glazing tape, glazing silicone, glass packers, 20mm brass or stainless steel pins
TOOLS REQUIRED 
2 SASH CLAMPS, MINIMUM CAPACITY 600MM
A hammer, a tape measure, a pencil, a set of chisels, a mallet, a marketing gauge, a drill, a screwdriver, a G cramp, a saw, a router and bit, a sander, sanding discs, a gasket push stick, a pair of scissors, a Stanley knife, a mastic gun,
 
Handcrafted solid Sapele or Utile hardwood traditional window 
measuring 900mm wide x 600mm high x 95mm deep. 
External frame section sizes, 
head and sides 95mm x 45mm, cill 95mm x 56mm, 
with the sub cill extending 70mm from the face.
Sash section sizes, head and sides 56mm x 45mm, bottom rail 56mm x 65mm. 
All sizes are before sanding so are approximate. 

Windows are supplied so that the 1 casement will open once assembled.